Initiating An External Call With Calling Line Identity Restriction - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Initiating an External Call with Calling Line Identity Restriction

Initiating an External Call with Calling Line Identity

If you want to prevent your next communication partner from seeing your

phone number on his phone display, you can suppress the phone number

display to your communication partner.

Proceed as follows:

Using a character string on the internal phone

Using the menu/function key on a system phone (optional, see the

phone manual)

Requirements:

The CLIR (calling line identity restriction) service feature has been

enabled by the network operator.

1. Pick up the receiver.

2. Dial *31#.

3. Enter an external number. Possible entries:

External number (for exchange line request type Internal phone: with

preceding exchange line access number)

Short code number (for exchange line request type Direct exchange

line phone: with preceding **)

Once you have finished dialling the phone number, the subscriber will

The phone number display suppression has been enabled for this call.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r