Initiating A Query Call - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Initiating a Query Call

Requirements:

For a query call with two external communication partners: at least two

external call channels

During a call, proceed as follows:

1. Press the Flash key or the Query key.

2. Enter a phone number. Possible entries:

Internal number of the individual phone (for exchange line request

type Direct exchange line phone: with preceding **)

Internal number of the group (for exchange line request type Direct

exchange line phone: with preceding **)

Internal number of the door (for exchange line request type Direct

exchange line phone: with preceding **)

External number (for exchange line request type Internal phone: with

preceding exchange line access number)

Short code number (for exchange line request type Direct exchange

line phone: with preceding **)

The subscriber is called.

Note: After pressing the Flash key or the Query key, you can also

initiate other call types (e. g. private calls), an InterCom announcement,

or a pick-up. Exception: During a door call only the dialling of one phone

number is possible.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r