Sip - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

SIP

Proceed as follows:

Separately for VoIP providers

Using the Configuration Manager (page Réseaux publics > Voice

over IP (VoIP page) > Fournisseur > Configurer)

Note: You can obtain the data for the settings either directly from the

VoIP provider or from suitable lists in the Internet.

Requirements:

For entering a URL: configured DNS server

For using a STUN server: IP operating mode IPv4

Select the provider to be displayed/configured.

The domain (also known as a "realm", "SIP domain" or "SIP realm")

is required for the VoIP address. The structure of a subscriber's

VoIP address is similar to an e-mail address. It is made up of the

VoIP phone number and the domain, separated by the @ character:

<subscriber>@domain.

Résolution de nom

There are both country-specific and provider-specific reasons why name

resolution is not always successful via the default gateway. In such cases,

another way should be chosen here.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r