Auerswald COMpact 5200 Advanced Information page 599

Connexion PTP
Requirements:
• Charge information provided by the network provider
The PBX stores the charge information sent by the network provider and
uses it to evaluate individual calls.
Important: Disabling this function is only advisable if it causes
problems on the external connection (this depends on the network
provider/country).
Important: Some telephony providers do not send charge information.
If this type of provider is being used, you cannot apply any charges to a
particular call.
Important: You cannot check exactly how many PBXs should be
charged for each call because, for example, you cannot uniquely assign
the charges to one of the two subscribers involved in a query call from an
external call.
Important: If you are using the Soft-LCR 4.0 LCR procedure, the
duration of the call and your own table of tariffs are used to calculate the
charges.
CCBS
Requirements:
• Service feature CCNR (callback on no response) is enabled by the
network provider.
• Configured prefixes (country prefix and local area code)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 599 -