Call Forwarding - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Call Forwarding

GENERAL SETTINGS FOR CALL FORWARDING

Méthode de transfert d'appel

Call forwardings at the exchange line are configured and performed in

different ways. The exchange line, router or the provider determines which

of the call forwardings listed below can be used.

The call forwarding is controlled in the PTMP exchange line. The digit

sequence depends on the provider or router.

Call Defelection

Call forwarding shall be executed directly by the exchange line. The PBX

sends a corresponding message with new destination number to the

exchange line. Accordingly, the call is forwarded to the new destination by

the provider/exchange line.

Note: Currently, providers support Call Deflection only at the SIP

2. B channel

The call forwarding is performed by the PBX during a call. It is possible for

all exchange line types but requires a free voice channel and the number

of the caller cannot be displayed unless CLIP no scrrening is used which

is not supported by many providers.

For call forwarding via the PBX, use any available call channel

Requirements:

Enabled call forwarding method 2. B channel

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r