Settings Of The Additional Numbers - Auerswald COMpact 5200 Advanced Information

Settings of the Additional Numbers

Settings of the Additional Numbers
Proceed as follows:
• Separately for PBX base numbers
• Using the Configuration Manager (page Réseaux publics > RNIS >
Additional PTP connection numbers)
Requirements:
• Configured PBX base number
Numéros Directs (SDA) en PTP supplémentaires
Select the extension number/bundle for that the additional numbers are to
be displayed/configured, provided that more then one PBX base number
was configured.
Numéro de téléphone supplémentaire
Some countries provide additional numbers for a PTP connection, in
addition to the DDI numbers. The network provider can assign up to ten
phone numbers for the connection.
The additional number specifies which character string a caller must dial
from the local phone network to reach the ISDN PTP connection. These
numbers are not attached to the PBX base number.
Note: You can input up to 250 external numbers for land line and VoIP
connections in the PBX. In other words, the total maximum number of
MSNs, DDI numbers and additional numbers is 250.
Phone number for CLIP no screening
Requirements:
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 618 -