Settings Of The Modules - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings of the Modules

Proceed as follows:

Using the Configuration Manager (page Matériel > Sélection des

Note: The specifications here have to match the actual hard ware

configurations of your PBX. If this is the case, the settings will be marked

in black. If it is not the case, the settings will be marked in red.

Note: If an inserted module should not be used, select the option non

affecté in the corresponding list field.

Configuration

Select the modules that are inserted in the corresponding slot.

Moves a module to another slot. The settings already made for this

module will not be lost by this action.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r