Configuration Options - Auerswald COMpact 5200 Advanced Information

Configuration Options

Configuration Options
Aside from configuration via the internal network, there is also the option
of remote configuration via the Internet as well as configuring alternative
connection options under certain conditions.
The connected system phones can also be configured over the PBX under
certain conditions.
You can use the following connection options to configure (either remotely
or directly) the PBX and the ISDN system phones connected to it:
Configuring the PBX via the internal network
The PBX is usually configured via an internal network connection. Your PC
must be connected to the same network as the PBX
Remote configuration of the PBX via the Internet with (Auerswald)
Remote Access Server
Remote configuration of the PBX can be accessed via the page https://
remote-access.auerswald.de on the Internet. This requires a dealer
access via the Internet and enabling of the (Auerswald) Remote Access
Remote configuration of the PBX via the Internet without (Auerswald)
Remote Access Server
You can also configure the PBX remotely via an internet connection
(DSL). This requires a fixed external IP address. Alternatively, you can use
VPN or DynDNS. The router on the PBX's network must be configured
accordingly.
Configuration of internal ISDN system phones via the PBX (internal)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 72 -