Auerswald COMpact 5200 Advanced Information page 873

Box Settings
Transmission errors occurring during the transmission (e. g. because
of faulty lines) will be corrected provided that EMC operation (Error
Correction Mode) has also been configured for the opposite end.
Note: If transmission errors occur very often (e. g. overseas lines of
VoIP connections with frequent packet losses), the transmission cannot be
carried out since the fax machines involved will cancel the transmission
due to an excessive number of transmission repetitions. In such cases,
it may be sensible to disable EMC error correction. Without EMC error
correction, the transmission errors occurred will be displayed as erroneous
dots or lines.
9 600 baud maximum
The transmission rate of a fax will be adapted in such a way that a
faultless transmission quality will be reached, where possible.
Note: The PBX supports a maximum transmission rate of 14400 baud.
This transmission rate may be too high for specific lines (e. g. overseas
lines or VoIP connections) and may lead to transmission interferences.
In such cases, it may be sensible to restrict the transmission rate to 9600
baud
Maximum recording capacity
Maximum size of the box
The maximum recording capacity specifies the maximum memory
capacity in megabytes (MB) available for the recording of messages of the
box.
Enter a value for the recording capacity between 15 and 999 MB. Behind
the entry field, it is displayed how much the entered value is in minutes. If
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 873 -