Shutting Down And Switching Off - Auerswald COMpact 5200 Advanced Information

Shutting Down and Switching Off

Shutting Down and Switching Off
If it is necessary to separate the PBX from the electric current (pull
the power plug of the PBX out of the socket and also of the accessory
equipment where required), the PBX will first have to be powered down
properly.
Proceed as follows for powering down and switching off the PBX:
Important: When shutting down the PBX, all of the connections to the
web server, all calls and all data services are terminated. Unsaved data is
lost.
• Immediate powering down.
- Using the Configuration Manager (page Administration > Mise à
jour et redémarrage du firmware)
Note: The PBX is powered down immediately. All connected calls will
be disconnected.
• Delayed powering down.
Using the Configuration Manager (page Administration > Mise à
-
jour et redémarrage du firmware)
Note: The PBX is powered down only after all calls are finished.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 109 -