Configuring The Pbx Remotely Via The Internet (Without (Auerswald) Remote Access Server) - Auerswald COMpact 5200 Advanced Information

Configuring the PBX Remotely via the Internet (without (Auerswald) Remote Access Server)

Configuring the PBX Remotely via the Internet
(without (Auerswald) Remote Access Server)
Requirements:
• Internet connection between the computer and the PBX (for example,
DSL)
• Permanent external IP address, or the use of VPN or DynDNS
• A router configured for this purpose
• Knowledge of user name and password for the Configuration Manager
• Knowledge of the configured port of the web server
Note: Refer to the operating manual of your router.
Note: The access is possible via http: and via https: (encrypted
access). If the option Forcer la connexion HTTPS has been enabled,
only the https connection can be used. In this case, a port you selected
yourself must be rerouted to port 443 of the PBX (access with https://
mein.dyndns.org:[Port], for example.
Important: An internal network is usually protected from actions
from the outside by, for example, a firewall integrated in the router. For
questions about configuring your firewall, contact the system administrator
responsible for this topic.
1. Start a browser (for example, Mozilla Firefox).
2. Enter https:// and the external IP address for the PBX as well as the :
character, and then the port, into the address field of the browser.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 76 -