Network Provider - Auerswald COMpact 5200 Advanced Information

Network Provider

Network Provider
Proceed as follows:
• Separately for external S
• Using the Configuration Manager (page Réseaux publics > RNIS >
Liasion Point-Multi-Point (PMP))
Requirements:
• External S
0
• Connection type PTMP connection on external S
Liasion Point-Multi-Point (PMP)
Select the PTMP connection to be displayed/configured.
La ligne peut passer des appels d'urgence
Requirements:
• The corresponding connection must allow emergency calls
This exchange line can be used for emergency calls.
Note: When switched off, this exchange line cannot be used for
emergency calls. When you attempt to dial an emergency number, you
will hear the announcement, "This phone does not allow emergency calls.
Please use an alternative."
Note: If you have updated your firmware from Version 6.4 to 6.6, the
phone allows emergency calls by default.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
ports
0
port (optional, see Technical Data in the Instructions)
- 568 -
port
0