Management Area Codes/Area Code Ranges - Auerswald COMpact 5200 Advanced Information

Management Area Codes/Area Code Ranges

Management Area Codes/Area Code Ranges
Proceed as follows:
Using the Configuration Manager (page Routage > Soft-LCR 4.0 >
•
Netze und LCR-Import > Configurer)
Indicatifs régionaux/zones d'indicatifs
Digit sequence for an area code or area code range. (Select
enter.)
A prefix contains the prefix or all of the prefixes from the area that should
be collected for the network (e.g., local phone network, regional network,
international network).
Nom
Freely selectable name. This name is used for identification within the
PBX.
Nouveau
Adds a new area code/area code range to the list.
Up to 1000 entries can be created for all networks in total.
Supprimer
Deletes the entries marked in the list.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 962 -
Neu to