Auerswald COMpact 5200 Advanced Information page 904

Settings Door Call
Select a call duration during which a door call is to be signalled to an
internal subscriber.
Note: Set the call duration in the connected door terminal to the
maximum call duration. The actual call duration will then be limited by the
PBx.
Exchange line dialling/number presentation DDI
Proceed as follows:
• Separately for configurations
The option permits the precise selection of the external connection and
even of the phone number to be presented.
Tous les raccordements externes ou internes
Door calls can be made on internal or on all external channels.
External connection
Door calls will be made on the selected external connection.
In the DDI entry field, enter the DDI to be presented from the extensions
block under the corresponding slot. If the DDI is displayed in red font
subsequently, it either does not belong to the value range or the maximum
number of own phone numbers has already been entered.
Deuxième sonnerie
Proceed as follows:
• Separately for configurations
Requirements:
• Created relay with operating mode Deuxième sonnerie
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 904 -