Exchange Line Transfer - Auerswald COMpact 5200 Advanced Information

Exchange Line Transfer

Exchange Line Transfer
A suitably authorised system phone, for example, the phone exchange,
can transfer the exchange line access required for an outgoing call to
another internal phone for a short period of time. This is meaningful, for
example, when this phone is located in a publicly accessible room and is
only occasionally used for external calls by an employee.
The exchange line transfer proceeds as follows:
• The requesting phone must initiate an internal call using the system
phone authorised to make the exchange in order to request exchange
line access.
• After the function key assigned to exchange line transfer has been
pressed on the system phone authorised for making exchanges, a
confirmation tone is issued to both internal subscribers and the internal
call must be ended.
• The requesting phone now has access to the exchange line settings
configured for this purpose. These exchange line settings remain until
the first successful, outgoing external call or until the time limitation
has elapsed for initiating the external call.
Proceed as follows for configuration:
• Making settings for exchange line transfer.
- Using the Configuration Manager (page Fonctions > Prise de la
ligne principale)
• Switching the authorisation for transferring external calls externally for
the transferred phone on.
Using the Configuration Manager (page Abonnés (Abo) >
-
Propriétés > Droits)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 50 -