Auerswald COMpact 5200 Advanced Information page 661

Phone Numbers for PTMP connection
Note: When an emergency number is dialled, the phone number
received from the network provider is always transmitted, not the phone
number you specified yourself.
Note: However, the correct phone number is also still transferred to
the exchange line, but this cannot be viewed by the person being called.
Note: CLIP no screening must be enabled for every connection
to ensure that the phone number for CLIP no screening is transmitted
instead of the phone number received from the network provider.
Phone number for CLIP no screening
Requirements:
• set up phone number
• CLIP no screening switched on for the VoIP account
Customer-specific phone number (e.g. a service phone number) that is
transferred to the destination by the exchange line without its correctness
being checked.
Nom d'affichage
This name is used for display purposes on the system phone.
Note: If no display name has been entered, the account name is
displayed.
Note: If your provider (in Germany) is T-Online, you must also enter
the VoIP phone number you received from them under Nom d'affichage.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 661 -