E-Mail - Auerswald COMpact 5200 Advanced Information

E-mail

E-mail
The PBX supports the following e-mail functions:
• System e-mails
• Forwarding of voicemail and fax messages
The settings described here must be made centrally in the PBX and can
then be freely assigned to the individual e-mail functions of the PBX.
You can configure up to four outgoing mail servers in the PBX. They can
be freely assigned to the individual e-mail functions of the PBX (system e-
mails, forwarding of voicemail and fax messages).
An outgoing mail server is responsible for the transfer of e-mails. You will
receive the access data for the outgoing mail server to be used from your
Internet service provider, for example.
The PBX supports a large number of logos (limited by the total memory
available). These logos can be freely assigned to the individual e-mail
functions of the PBX (system e-mails, forwarding of voicemail and fax
messages).
For the e-mails to be sent by the PBX, several language files are included
in the scope of supply. The PBX supports additional user-defined which
can be generated on the basis of the existing language files.
The language files contain several text modules which are used to
generate e-mails. The language files are in *.xml format.
Proceed as follows for configuration:
• Configuring an outgoing mail server.
- Using the Configuration Manager (page Administration >
Courrier électronique > Serveur du courrier sortant)
• Assigning an outgoing mail server to a voice mail/fax box.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 68 -