File Management - Auerswald COMpact 5200 Advanced Information

File Management

File Management
Proceed as follows:
Using the Configuration Manager (page Abonnés (Abo) >
•
Provisioning d'IP > Gestion des fichiers)
types d'appareils
Select the device to be configured.
If there is no file available for a device type which means that the list for
the provisioning files is still empty, a new provisioning file must be created
via Nouveau.
If a template exists for a device type, it is copied to the new file.
Pré-réglage de l'éditeur
Éditeur de fichiers
Via the file editor, settings (e.g. NTP or contacts) are directly made in the
provisioning file (*.xml, *.cfg).
Provisioning file (*.xml, *.cfg) > Éditer
Variables for the parameters to be provisioned are created as
palceholders in the configuration files provided by the manufacturer.
During provisioning, these are replaced by the corresponding values from
the PBX configuration.
Changes in the settings are effective after saving.
COMfortel IP Editor
The COMfortel IP Editor simplifies the provisioning settings (e.g. NTP or
function keys) and is only available for the COMfortel xx00 IP devices.The
settings are adopted to the provisioning file after saving.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 709 -