Auerswald COMpact 5200 Advanced Information page 721

Exchange Line Settings
configured as En fonction de la ligne. For each exchange line can a
separate number be presented to the network provider. To keep these
numbers from being presented to the caller, number presentation can be
suppressed per exchange line separately.
Note: If number presentation needs to be suppressed between
the PBX and the network provider, the Présentation du numéro de
téléphone (appels sortants) must also be configured as Aucune.
Note: For the option Aucune, the phone service Calling Line
Identification Restriction (CLIR2) must be released by the network
provider.
Présentation du numéro de téléphone (appels entrants) Experts
Defines which phone number is presented back to the caller.
Aucune
The phone number is suppressed.
Par défaut
Both the DDI parallel to the internal number and the MSN on the PTM
connection over which the subscriber is called are presented on the PTMP
connection.
En fonction de la ligne
The phone number to be presented is configured separately for each
external connection under Experts.
Note: For the option Aucune, the phone service Connected Line
Identification Restriction (COLR2) must be released by the network
provider.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 721 -