Switch Input - Auerswald COMpact 5200 Advanced Information

Switch Input

Switch Input
If a device that is suitable as switch input (e. g. a door terminal with door
bell buttons) is connected to the PBX, it can then be used to trigger a door
call or an alarm.
Proceed as follows for configuration:
• Creating a switch input for an alarm.
Using the Configuration Manager (page Périphériques >
-
Alarmes)
• Creating a switch input for a door call.
Using the Configuration Manager (page Périphériques >
-
Interphones)
• Configuring switch inputs.
- Using the Configuration Manager (on the following pages)
-
Périphériques > Alarmes > Entrée >
-
Périphériques > Interphones > Appels d'interphone >
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
)
- 205 -
)