Auerswald COMpact 5200 Advanced Information page 49

Exchange Line Request
additional digits for an external number are being entered, before it dials
the internal phone number. To avoid waiting time, you can subsequently
enter #. The PBX therefore recognises the input as finished and instantly
starts dialling.
Note: In factory settings, the system-wide automatic exchange line
request (for all subscribers) is switched on. Alternatively, the exchange
line request type can be set separately for each subscriber. In this
case, the automatic exchange line request can only be selected for IP
DECT phones, COMfortel 1200 IP and COMfortel C-400. For all other
subscribers, only direct exchange line phone and internal phone can be
selected.
Proceed as follows for configuration:
• Making settings for exchange line request.
Using the Configuration Manager (page Réseaux publics >
-
Indicatif)
• Making settings for exchange line request separately for subscribers.
Using the Configuration Manager (page Abonnés (Abo) >
-
Propriétés > Paramètres > Fonctions spéciales)
Note: This setting is only visible, if Indicatif automatique au niveau
du système is disabled
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 49 -