Initiating Query Call To Third Subscriber - Auerswald COMpact 5200 Advanced Information

Initiating Query Call to Third Subscriber

Initiating Query Call to Third Subscriber
If you want to connect a further communication partner during a query
call, you can initiate a third call for this purpose. Both the first and second
communication partner will be on hold in the background during this time.
Requirements:
• Initiated query call
During a query call, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 5.
3. Enter a phone number. Possible entries:
Internal number of the individual phone (for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group (for exchange line request type Direct
exchange line phone: with preceding **)
External number (for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number (for exchange line request type Direct exchange
line phone: with preceding **)
As soon as to the subscriber being called picks up the receiver, you
will make a third call.
Important: To use this function on ISDN and system phones, the
function must be supported via a function key or via the menu by the
respective phone (optional, see manual for the phone).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 327 -