General Info - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

General Info

Important: The expert settings for the ISDN connection are

settings that should only be changed if e. g. country or provider-specific

particularities make it absolutely necessary.

Proceed as follows:

Using the Configuration Manager (page Réseaux publics > RNIS >

Liasion Point-Multi-Point (PMP) > Paramètres expert > Configurer)

Requirements:

Configured PTMP connection

Indicatif international

International phone prefix (e. g. 0044 for the UK).

Local area code

Phone number prefix (e. g. 0208 for Greater London).

Note: If there is no fixed digit sequence as the area code at the

installation location of the PBX, no entry is required here.

Niveau de sélection

The selection of the dial level (Location, National, International) is country-

specific. Depending on the country and the settings for the local area

code above, a dial level must be selected (example: In Belgium, local

area codes do not exist. Here, the dial level Emplacement must not be

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r