Uploading The Configuration Automatically - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Uploading the Configuration Automatically

Proceed as follows:

Using the PBX

Requirements:

PBX set to factory settings

Configuration file named auconfig.cfg saved on a USB memory stick

For some installation and maintenance work, it is necessary to open

the PBX while it is in operation (qualified electrician only). Make sure

that the PBX is never left unattended while working with an open

casing. Close the casing after completing this work.

Only a qualified electrician may perform installation work within an

open casing or service work using the buttons inside the casing. If

necessary, commission a specialised dealer to perform this work.

Touching voltage-carrying conductors or phone connections can cause

life-threatening electric shocks.

Warning: Power surges, which can occur during electrical storms, can

cause life-threatening electric shocks and damage or destroy the PBX.

Do not open the PBX during an electrical storm.

1. Turn the PBX off.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Do you have a question about the COMpact 5200 and is the answer not in the manual?

Compact 5200r Compact 5500r