Statut Abonnés Internes - Auerswald COMpact 5200 Advanced Information

Statut abonnés internes
Statut abonnés internes
Proceed as follows:
•
Using the Configuration Manager (
abonnés internes)
Display of registration (IP and ISDN phones), connection (analogue
phones) and provisioning of subscribers, door terminals and (not yet)
assigned devices by a coloured dot.
Note: The page initially displays the status when the page is opened
and will automatically be updated every 30 seconds.
Note: Not all status information can be updated automatically (see
following sections).
Status analogue phones
Unknown analogue phone.
Connected analogue phone with date of last activity time.
Note: After connecting an analogue phone, the receiver must be
picked up for correctly displaying the phone status. The monitoring page
should then be updated.
Note: The PBX cannot automatically recognize the removal of a
device. It's hardware status can be reset under Abonné > Propriétés >
Paramètres de base > Réinitialiser le statut du matériel.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Surveillance > Statut
- 509 -