Phone Numbers for PTMP connection
Phone Numbers for PTMP connection
Proceed as follows:
•
Separately for VoIP accounts
•
Using the Configuration Manager (page Réseaux publics > VoIP >
Comptes > Configurer)
Note: You will receive the settings data from the VoIP provider with
whom you have set up the account.
Compte
Select the account to be displayed/configured.
Identité en départ
Requirements:
•
CLIP no screening service feature supported and enabled by the
network provider
•
Type of number presentation configured for the VoIP provider
In accordance with RFC 3325 with P-Asserted-Identity or In
accordance with RFC 3325 with P-Preferred-Identity
The exchange line transfers the customer-specific phone number (e.g. a
service phone number) entered in Phone number for CLIP no screening
to the call destination without checking that this number is correct.
Note: In Germany, some providers only offer this service feature for
PTP connections. The CLIP no screening function for VoIP connections
also depends on which provider is being used.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 660 -
Need help?
Do you have a question about the COMpact 5200 and is the answer not in the manual?
Questions and answers