Placing Communication Partner In Waiting Loop - Auerswald COMpact 5200 Advanced Information

Placing Communication Partner in Waiting Loop

Placing Communication Partner in Waiting Loop
If the internal subscriber to which you want to transfer an communication
partner is busy, you can place the communication partner in the waiting
loop of this subscriber.
Requirements:
• Internal transfer destination is a group (at least one subscriber logged
in as incoming) or a subscriber
If the internal phone to which you are trying to transfer a call is busy,
proceed as follows:
1. Wait.
You will automatically be reconnected with the waiting communication
partner.
Note: On many ISDN phones, the termination of a query call on busy
is not performed automatically, but via a function key or via the menu
(optional, see manual for the phone).
2. Press the Flash key or the Query key.
3. Dial ##07.
You will hear the confirmation tone.
4. Hang up the receiver.
The communication partner continues to listen to hold music.
As soon as the internal subscriber hangs up the receiver or
one subscriber logged in to the group becomes available, this
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 335 -