Loudspeaker Announcement - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Loudspeaker Announcement

This function enables loudspeaker announcements over an active

loudspeaker (for example, a loudspeaker system in a waiting room). In

addition, a previously specified phone number is called by an internal

phone. The call connection is immediately established after dialling the

phone number.

In order to make loudspeaker announcements, a device that can be used

as announcement output (e. g. an a/b-Audiobox at a loudspeaker system)

must be connected to the PBX. This announcement output must be

created in the configuration of the PBX and assigned an internal number

Proceed as follows for configuration:

Creating an announcement output with internal number.

Using the Configuration Manager (page Périphériques >

Assistant de périphériques)

Creating a relais and assigning it to an announcement output.

Using the Configuration Manager (page Périphériques >

Interfaces de paging)

If necessary, making additional settings for the announcement output.

Using the Configuration Manager (page Périphériques >

Interfaces de paging)

Switching the authorisation for speaker announcements for the

involved internal phones on.

Using the Configuration Manager (page Abonnés (Abo) >

Propriétés > Droits)

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r