Analogue Connection
Analogue Connection
The existing analogue connections can be connected to the external
analogue ports of the PBX (optional, see Technical Data in the
Instructions).
Proceed as follows for configuration:
•
Configuring the analogue connection and entering the phone number.
Using the Configuration Manager (page Réseaux publics >
-
Analogique)
•
Creating a call distribution for the analogue connection.
Using the Configuration Manager (page Réseaux publics >
-
Acheminement des appels)
•
If necessary, making country-specific modifications.
-
Using the Configuration Manager (page Réseaux publics >
Analogique > Configurer)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 52 -