Calling A Third Subscriber And Transferring To An Active Communication Partner - Auerswald COMpact 5200 Advanced Information

Calling a Third Subscriber and Transferring to an Active Communication Partner

Calling a Third Subscriber and Transferring to an
Active Communication Partner
Assuming that you have gained an additional communication partner
from a call, e. g. from accepting a call signaled by call waiting, and this
second communication partner want to be transferred now to somebody
else. You can now initiate a third call that connects the second and third
communication partners with each other and then continue phoning with
your first communication partner.
During a query call, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 5.
3. Enter a phone number. Possible entries:
External number (for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number (for exchange line request type Direct exchange
line phone: with preceding **)
Internal number of the individual phone (for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group (for exchange line request type Direct
exchange line phone: with preceding **)
As soon as the subscriber being called picks up the receiver, you will
make a third call.
Important: To use this function on ISDN and system phones, the
function must be supported via a function key or via the menu by the
respective phone (optional, see manual for the phone).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 337 -