Analogue Connection - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Analogue Connection

Proceed as follows:

Separately for analogue ports

Using the Configuration Manager (page Réseaux publics >

Analogique > Numéros de téléphone > Configurer)

Requirements:

External analogue port (optional, see Technical Data in the

Instructions)

Connexion analogique

Select the analogue connection to be displayed/configured.

Apply country settings for

Accepts the country settings for the selected country.

Note: The analogue port has default settings that are required for

analogue ports in the country in which the PBX is operating. The settings

are specified by selecting the country when you set up the device for

the first time. Changes to the port must be made, for example, when

connecting a GSM gateway that was purchased in a different country and

therefore requires different default settings.

Note: You do not usually need to change these default values.

However, if you do need to, follow the instructions from your network

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r