Auerswald COMpact 5200 Advanced Information page 595

Settings PBX Base Number/Bundle
Note: You must enter all the extension numbers for a PTP connection
that is not running linear call distribution.
Passerelle GSM
The S port supports the GSM gateway connected to it. Any phone
0
numbers can be used for the connection. They must be entered in the
PBX and GSM gateway configurations.
Note: When you configure the GSM gateway, you must also input the
connection type of the ISDN connection.
Note: GSM gateways accept external phone calls automatically. This
may cause call charges for the caller, even if no-one picks up the phone at
the internal destination.
Note: If the PBX is not connected to the land line, outgoing external
calls can only be accepted via a targeted exchange line access using the
phone numbers entered on the page Routage > VoIP/GSM Routing >
Numéros de téléphone d'exception (and the corresponding accesses,
also configured on this page) or via a configured preferred exchange line
(Paramètres de ligne for subscribers or groups).
La ligne peut passer des appels d'urgence
Requirements:
• The corresponding connection must allow emergency calls
This exchange line can be used for emergency calls.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 595 -