Remote Configuration And Alternative Connection Options - Auerswald COMpact 5200 Advanced Information

Remote Configuration and Alternative Connection Options

Remote Configuration and Alternative Connection
Options
Configuration Options
Configuring the PBX Remotely with (Auerswald) Remote Access Server
via the Internet
Configuring the PBX Remotely via the Internet (without (Auerswald)
Remote Access Server)
Configuring ISDN System Phones via the PBX (Internal)
Configuring ISDN System Phones Remotely via the External S 0 Port
on the PBX (Externally)
Aside from configuration over the internal network, there is also the option
of remote configuration via the Internet as well as configuring alternative
connection options under certain conditions.
The connected system phones can also be configured over the PBX under
certain conditions.
You can use the following connection options to configure (either remotely
or directly) the PBX and the ISDN system phones connected to it:
Configuring the PBX via the In-house Network
The PBX is usually configured via an internal network connection. The PC
you use to do this must be connected to the same network as the PBX.
Configuring the PBX Remotely via the Internet with (Auerswald)
Remote Access Server
Remote configuration of the PBX can be accessed via the page https://
remote-access.auerswald.de on the Internet. This requires a dealer
access via the Internet and enabling of the (Auerswald) Remote Access.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 70 -