Management Subscriber - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Management Subscriber

Proceed as follows:

Using the Configuration Manager (page Abonnés (Abo) > Numéros

de téléphone)

Numéro de téléphone

This is an internal number. You can select any of the numbers in

the internal supply of phone numbers. This number is then used for

distributing calls and can be called directly by another internal subscriber.

Nouveau to enter.)

Note: A number cannot be allocated twice.

Note: Using numbers with few digits (two- or three-digit numbers)

inevitably restricts the possible supply of numbers that require more digits.

For example, if the phone number 12 is assigned, the phone numbers 120

to 129 and 1200 to 1299 are no longer available.

Note: The default exchange line access number on the PBX is 0 in the

factory settings. However, this can be changed. Note that changing the

exchange line access number restricts the phone numbering plan.

Note: The internal number entered here needs to be entered in the

ISDN unit or in the system phone as the (first) MSN. Also on an ISDN unit,

make sure that the phone number is transmitted to the PBX.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r