Auerswald COMpact 5200 Advanced Information page 607

Transfert d'appel
Clavier
The call forwarding is controlled in the PTMP exchange line. The digit
sequence depends on the provider or router.
Installation CD
The call forwarding is controlled in the PTMP connection. Not every
provider supports this method.
2. B channel
The call forwarding is performed by the PBX during a call. It is possible for
all exchange line types but requires a free voice channel and the number
of the caller cannot be displayed unless CLIP no scrrening is used which
is not supported by many providers.
Note: The setting Installation CF has priority to the setting 2. B
channel.
For call forwarding via the PBX, use any available call channel
Requirements:
• Enabled call forwarding method 2. B channel
When an external phone number is forwarded, the call can be forwarded
via a call channel on any of the other ports.
Note: A call can only be redirected via a call channel on the same port.
The probability that the call cannot be forwarded because the channels
are busy is therefore higher.
Renouveler le transfert d'appel en cas de redémarrage du système
When rebooting the PBX, the saved data of the call forwarding is
renewed.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 607 -