Auerswald COMpact 5200 Advanced Information page 159

Emergency Calls
like emergency numbers, dialled either with or without the exchange line
access number, depending on the configuration. However, calls to service
numbers are not handled like emergency calls. If you want to prevent
service numbers from being dialled (e.g. to an external subscriber on the
same PBX), set up a call restrictor for each individual service number.
Proceed as follows to set up emergency calls:
• switching emergency call ability for external connections, providers
and accounts on/off.
- Using the Configuration Manager (on the pages that follow)
Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)
-
- Réseaux publics > RNIS > Numéro Principal d'abonnement/
Faisceau (NDI) > Configurer
- Réseaux publics > Analogue Connections
Réseaux publics > VoIP > Fournisseur > Configurer
-
- Réseaux publics > VoIP > Comptes > Configurer
• Configuring emergency calls.
- Using the Configuration Manager (page Réseaux publics >
Appels d'urgence)
Note: Public emergency numbers are set as default settings when
you select the country settings (using the configuration wizard), when
commissioning the PBX. These numbers cannot be deleted. You can
only enter different public emergency numbers as default settings by
changing the country settings at a later point in time. Be aware of any
possible conflicts between the country-specific emergency numbers and
the existing internal phone numbering plan. If necessary, assign new
"Internal numbers".
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 159 -