Blind Transfer (Transferring Without Announcement) - Auerswald COMpact 5200 Advanced Information

Blind Transfer (Transferring without Announcement)

Blind Transfer (Transferring without Announcement)
If you want to transfer an external communication partner to another
internal subscriber, you do not have to wait until the subscriber being
called via the query call accepts the call; you can hang up the receiver
while this call is being made. The internal subscriber will continue to be
called.
Requirements:
• Internal transfer destination
During a call, proceed as follows.
1. Press the Flash key or the Query key.
2. Enter the internal number. Possible entries:
Internal number of the individual phone (for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group (for exchange line request type Direct
exchange line phone: with preceding **)
3. Wait until you hear the ringtone.
4. Hang up the receiver.
Once the called subscriber accepts the call, he is connected to the
external subscriber.
Note: If the subscriber being called does not accept the call, the call
will be transferred back to your phone 60 seconds later (your phone
rings). If you do not accept the call within 60 seconds the call will be
disconnected. If your own phone has become busy in the meantime, the
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 333 -