Evaluation Of Incoming Sip Messages - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Evaluation of Incoming SIP Messages

Proceed as follows:

Separately for VoIP providers

Using the Configuration Manager (page Réseaux publics > Voice

over IP (VoIP page) > Fournisseur > Configurer)

Note: You can obtain the data for the settings either directly from the

VoIP provider or from suitable lists in the Internet.

Requirements:

For entering a URL: configured DNS server

For using a STUN server: IP operating mode IPv4

Select the provider to be displayed/configured.

The phone numbers of incoming VoIP calls listed in the call data list

usually need to be converted before they can be used for callbacks.

Note: To check these settings, direct incoming exchange line calls

via this VoIP provider, e.g. using a mobile phone, and check the phone

number sent along with the call in the call data list (in Données des

utilisateurs > Liste des appels).

Note: To identify the user-defined settings, select an incoming

call under Surveillance > Flux de données réseau and view it in the

Wireshark programme. Select the options you require in the list fields

under Hiérarchisation des recherches (description Wireshark). The

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r