ISDN Connection
ISDN Connection
The existing ISDN can be connected to the external S
(optional, see Technical Data in the Instructions).
Proceed as follows for configuration:
•
Configuring the connection type for the ISDN connection.
Using the Configuration Manager (page Matériel > Configuration
-
du port)
•
Configuring the PTMP connection and entering phone numbers.
-
Using the Configuration Manager (on the following pages)
Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)
-
-
Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP) >
Configurer
•
Configuring the PTP connection and entering phone numbers.
-
Using the Configuration Manager (on the following pages)
-
Réseaux publics > RNIS > Numéro Principal d'abonnement/
Faisceau (NDI)
Réseaux publics > RNIS > Numéro Principal d'abonnement/
-
Faisceau (NDI) > Configurer
-
Réseaux publics > RNIS > Numéros Directs (SDA) en PTP
•
Creating a call distribution for the ISDN connection.
Using the Configuration Manager (page Réseaux publics >
-
Acheminement des appels)
•
If necessary, entering additional numbers for the PTP connection.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 118 -
ports of the PBX
0