Auerswald COMpact 5200 Advanced Information page 139

Uploading the Configuration Automatically
2. Insert the USB memory stick into the USB port (USB host) on the CPU
module.
3. Turn the PBX on.
The configuration data saved on the USB memory stick is
automatically saved in the PBX. Finally, the PBX restarts.
If the Power LED lights up in green again, the restart is complete and
the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has
occurred. Please contact your specialised dealer or the manufacturer
directly.
Note: Any network settings saved in the configuration file will be taken
over during automatic uploading. If the network settings were not saved in
the configuration file, the factory network settings will be retained.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 139 -