Routing - Auerswald COMpact 5200 Advanced Information

Routing

Routing
Utiliser Soft-LCR 4.0 pour ce raccordement
Requirements:
• Network provider must support the dial-around service
• Configured prefixes (country prefix and local area code)
• Configured LCR (see LCR)
The VoIP connection is used for LCR calls.
Note: LCR must be disabled if the network provider does not support
LCR.
Note: However, you can always perform LCR manually by dialling a
provider area code prefix if the network provider supports the dial-around
service.
LCR provider digit-recognition for this connection
Requirements:
• Disabled Adopt settings from PBX location (Germany)
The digits in the table below are the common LCR number prefixes in
Germany. For other countries, more LCR number prefixes (a total of 10)
can be entered.
Nombre de chiffres Les chiffres commencent par
5
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
010
- 666 -