Call Distribution For - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Call Distribution for

Proceed as follows:

Separately for configurations

Separately for external connections

Using the Configuration Manager (page Réseaux publics >

Acheminement des appels)

Note: External numbers that are required as Call Through numbers

(Fonctions > DISA (Call Through)) are not allowed to be used in call

distribution.

Note: In order for a subscriber to signal incoming external calls, it

needs at least Discrimination (business) Entrants uniquement, avec

appel d'urgence (Abonnés (Abo) > Propriétés > Paramètres de ligne).

Note: An internal destination can be assigned to an external number.

Internal destinations can be subscribers, groups, Voice mail and fax boxes

or the automatic reception functions.

Note: If several subscribers ring simultaneously, they are grouped.

CALL DISTRIBUTION FOR

Select the connections to be displayed/configured.

A separate call distribution is set for each external connection. A single

connection as is defined here as:

A PTMP connection (fixed network or GSM)

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r