Intercom Announcement/Hands-Free - Auerswald COMpact 5200 Advanced Information

InterCom Announcement/Hands-Free

InterCom Announcement/Hands-Free
The InterCom function enables an announcement to system phones (one
phone or group) from any internal phone without someone having to
actively receive a call (for example, in a doctor's office).
Furthermore, the caller's system phone can be programmed to switch
on the microphone in addition to the loudspeaker (hands-free) so that a
person nearby can speak with the caller using this intercom system.
InterCom announcement and InterCom hands-free are carried out as
follows:
• A single system phone or a group is called using the InterCom
function.
Note: If a group is called using the InterCom function, all system
phones of the group that have given the InterCom permission and are
ready to take calls will be called. The group status (logged in, logged out)
will not be taken into account. Hands-free calling is not possible in the
case of an InterCom call to a group.
• After a few rings, the system phone/system phones of the group
members automatically pick up the call.
• Announcement or hands-free calling is executed.
Note: Announcement or hands-free calling is limited to 120 seconds
due to security reasons in order to prevent possible misuse of this function
(for example, eavesdropping from remote rooms).
• After 120 seconds has elapsed, the connection is automatically
interrupted unless the system phone receiver is picked up during this
time.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 114 -