Configuration Ethernet - Auerswald COMpact 5200 Advanced Information

Configuration Ethernet

Configuration Ethernet
Proceed as follows:
•
Using the configuration wizard (
Disposer automatiquement de l'adresse IP (client DHCP)
Note: In the factory settings, DHCP is enabled.
The PBX receives its IP address automatically from the DHCP server.
Assigning IP address manually
Requirements:
• Disabled DHCP client
Adresse IP
IPv4 address in the range 0-255 (example: 192.168.0.240).
Reprendre immédiatement
The IPv4 address is immediately applied and the PBX is routed to the new
IPv4 address. Renewed registration required.
Reprendre en cas de redémarrage
The IPv4 address is not applied until the next time the PBX is restarted.
Masque de sous-réseau
IPv4 address of the subnet mask in the range 0-255 (example:
255.255.255.0).
Passerelle
IPv4 address of the gateway in the range 0-255 (example: 192.168.0.2).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
> Configuration réseau)
- 444 -