Ending One Of The Two Calls - Auerswald COMpact 5200 Advanced Information

Ending One of the Two Calls

Ending One of the Two Calls
When you end a query call and want to continue talking with one of the
communication partners, you can specifically end the call with the other
communication partner separately.
If one of your two communication partners hangs up the receiver, you will
remain connected with the other one.
Alternatively, during a query call, proceed as described in one of the
following steps.
Press the Flash key or the Query key and dial 1.
•
The current call is disconnected.
You will then make an one-to-one call with the communication partner
who had previously been on hold.
Press the Flash key or the Query key and dial 0.
•
The call in the background will be disconnected.
You will then make an one-to-one call with the communication partner
who had previously been active.
Note: Note. You can also use this function on analogue phones, where
it can be performed via the T-Net function key/menu (optional, see manual
for the phone).
Note: On ISDN and system phones, this function is performed via an
existing function key or via the menu (optional, see manual for the phone).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 325 -