Expalanations And Setting Options - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Expalanations and Setting Options

The PBX supports the connection and control of various types of relays.

A relay can be part of a connected door terminal or another connected

device (e.g. an IP switch relay). Relays can have various functions on

the PBX. For a detailed description of the operating modes, refer to the

Relay Operating

Note: The internal system relay with the identification number 900

(factory setting) has a special position. It can only be used in the operating

type automatic configuration switchover to switch it via phone on or off.

For this purpose, the relay is being switched on or off. For the operation of

standard phones see Relay, for system phones see manual of the phone.

Proceed as follows for configuration:

Creating an IP switch relay.

Using the Configuration Manager (page Périphériques >

Assistant de périphériques)

Creating a relay.

Using the Configuration Manager (page Périphériques > Relais

(actionneurs))

Configuring the operating mode for the relays.

Using the Configuration Manager (page Périphériques > Relais

(actionneurs))

Configuring relays.

Using the Configuration Manager (page Périphériques > Relais

(actionneurs) > Configurer)

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r