Configuring Analogue Door Terminals - Auerswald COMpact 5200 Advanced Information

Configuring Analogue Door Terminals

Configuring Analogue Door Terminals
Proceed as follows:
Using the Configuration Manager (page Périphériques > Assistant
•
de périphériques > Configurer)
Relay X, Switch input X
Nom
Enter the names of the relays and switch inputs.
Séquence DTMF
Requirements:
• Expert settings
Enter the request that is assigned to the door bell button within the door
terminal. Possible entries: Digits and characters (Possible entries: *, #).
Numéro de téléphone composé
Select or enter the required call destination (external number, short-code
number, internal number of the individual phone, internal number of the
group).
Note: The call destination is first entered identically for all
configurations. It can be changed later.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 888 -