Transferring A Caller Of The Main Pbx To Another Subscriber On The Main Pbx From The Sub-System Pbx - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Transferring a Caller of the Main PBX to Another Subscriber on the Main PBX from the Sub-

Transferring a Caller of the Main PBX to Another

Subscriber on the Main PBX from the Sub-System

Requirements:

Two free external VoIP channels for the subordinate PBX

Authorisation Transfert d'appels externes vers l'extérieur assigned

to the subscriber of the subordinate PBX (page Abonnés (Abo) >

Propriétés > Droits)

Note: Set the maximum duration of the transferred call (page

Abonnés (Abo) > Tous les abonnés) to limit the time the two external

VoIP channels are occupied.

1. Initiate a query call to the other subscriber on the main PBX.

2. Hang up the receiver while the other phone is still ringing (blind

transfer) or during the query call.

Both communication partners are connected to each other.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r