Profiles - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Profiles

Profiles can be created for subscribers, groups, and Voice mail and fax

boxes. These profiles control the behaviour by determining the properties.

In this way, analogue behaviour can be reached via the configuration-

dependent assignment of profiles. When creating the profiles, it can

be determined whether the individual settings from the profile can be

changed via the properties of the subscriber, group, or the boxes or not.

Proceed as follows for configuration:

Create profiles for subscribers and assign them depending on the

configuration.

Using the Configuration Manager (on the following pages)

Abonnés (Abo) > Profils > Configuration

Abonnés (Abo) > Profils > Affectation des profils

Create profiles for groups and assign them depending on the

configuration.

Using the Configuration Manager (on the following pages)

Groupes > Profils > Configuration

Groupes > Profils > Affectation des profils

Create profiles for voicemail and fax boxes and assign them

depending on the configuration.

Using the Configuration Manager (on the following pages)

Périphériques > Boîtes de messagerie vocale/télécopie >

Profils > Configuration

Périphériques > Boîtes de messagerie vocale/télécopie >

Profils > Affectation des profils

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r