Auerswald COMpact 5200 Advanced Information page 338

Calling a Third Subscriber and Transferring to an Active Communication Partner
4. Proceed as required.
• To connect the second and third communication partner and to
perform a one-to-one call with the first communication partner,
press the Flash key or the Query key and dial 4.
•The second and the third communication partner are now
connected with each other.
•Then return to conducting an individual call with your first
communication partner.
• To connect the second and third communication partner and to
terminate the call with the first communication partner, hang up the
receiver.
•The second and the third communication partner are now
connected with each other.
•The first call will be signaled by the PBX if it was an external call.
The internal call is disconnected.
Note: If the third communication partner is not ready to be transferred
to the second communication partner, press the Flash key or the Query
key and dial 1. You will then get back to the normal query call.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 338 -